"Hera" Steam Cleaner

Download a PDF version of your "Hera" Steam Cleaner user manual.

Click here to download.

Possible Surfaces:

• The Schenley Hera Steam Cleaner is suitable for most hard floor surfaces, including tile, laminate, vinyl, and sealed hardwood.
• It can also be used on carpets, upholstery, fabrics, grout, and other indoor surfaces.

Precautions:

• Always test on an inconspicuous area before cleaning the entire surface.
• Refer to the manufacturer’s user manual for sensitive surfaces.

Steps to Assemble and Set Up:

1. Attach the desired accessory or nozzle to the steam cleaner.
2. Fill the water tank with clean tap water up to the recommended level.
3. Secure the water tank and ensure all parts are properly aligned.
4. Plug the steam cleaner into a power outlet and wait for the heating indicator light to signal readiness.

Important:

• Ensure the unit is powered off during assembly.

Answer:

• The water tank has a capacity of 350 ml.
• It provides up to 20 minutes of continuous steam depending on the selected steam intensity.

Tip:

• Refill the tank promptly when the water level runs low for uninterrupted operation.

• The steam cleaner heats up in approximately 3 minutes after being turned on.
• The indicator light will signal when the unit is ready to start cleaning.

• No, it is strongly recommended to use tap water only in the water tank.
• Adding cleaning solutions or detergents may damage the steam cleaner and void the warranty.

• Yes, the Schenley Hera Steam Cleaner uses chemical-free steam, making it safe for homes with children and pets.
• However, ensure that children and pets are not in close proximity during operation due to the high-temperature steam.

Steps to Maintain and Clean:

1. Turn off and unplug the unit. Allow it to cool completely.
2. Empty the water tank to prevent stagnant water buildup.
3. Wipe down the exterior with a damp cloth.
4. Clean the steam nozzle and accessories as needed.

Tip:

• Perform regular descaling if using hard water to prevent mineral buildup.

• Yes, the steam cleaner can be used on upholstery, fabrics, and curtains when paired with the appropriate accessory.
• Use a low steam intensity setting and test on a small, inconspicuous area first.

Steps to Store the Steam Cleaner:

1. Turn off and unplug the steam cleaner.
2. Allow it to cool completely.
3. Empty the water tank and clean the nozzle and accessories.
4. Store the unit in an upright position in a cool, dry place.

Tip:

• Wrap the power cord neatly to prevent tangles or damage.